61 31 152 Removing And Installing (Replacing) Control Unit In Center Armrest At Front

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 341

Necessary preliminary tasks:

Remove center armrest (front) . See 51 16 195 REMOVING AND INSTALLING CENTER ARMREST (FRONT) .

CAUTION: To avoid damage, place center armrest on a suitable surface.

Disconnect plug connections (1) from control unit in center armrest (2).

Fig 1: Identifying Plug Connection And Center Armrest

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Lever out front center armrest trim (2) with special tool 00 9 341 and remove and direction of arrow.

Fig 2: Identifying Special Tool (00 9 341)

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock catches (1), feed out control unit in center armrest (2) in direction of arrow and remove.

Fig 3: Identifying Catches And Center Armrest

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming
Coding
Car & Key Memory
CD "CIP"

Fig 4: Identifying IDC
Courtesy of BMW OF NORTH AMERICA, INC.