52 17 ... Removing and installing/replacing left or right thigh support

WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.

Loosen screws (1).

Disconnect plug connections (2).

Remove thigh support (3) towards top.

Fig 1: Locating Thigh Support Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, unclip trim (1) towards top and remove.

Installation:

Secure guide pins (2) in seat frame and clip trim (1) into place.

Fig 2: Securing Guide Pins In Seat Frame And Clipping Trim

Courtesy of BMW OF NORTH AMERICA, INC.