33 32 153 Removing and installing/replacing front compression strut

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT:

Observe SAFETY INFORMATION for raising the vehicle

Driving without compression struts is not permitted!

Release screws of underbody panelling (1).

Remove underbody panelling (1).

Fig 1: Identifying Underbody Panelling With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 33 33 2AZ .

Release screw (2) and remove compression strut (3).

Tightening torque 33 33 1AZ .

IMPORTANT: Secure rear axle support by inserting screw (2).

Installation note:

Check threads for damage; if necessary, repair with HELICOIL THREAD INSERTS .

Fig 2: Identifying Compression Strut With Screws

Courtesy of BMW OF NORTH AMERICA, INC.