Simultaneous operation of accelerator and brake pedals: Notes
WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
This test module serves to detect whether the accelerator pedal mechanically jams or is otherwise difficult to move. This is determined by simultaneously operating the accelerator and brake pedals while the vehicle is being driven.
The fault is set in the engine management system if a driver's demand is detected via the accelerator pedal for at least 1.5 seconds and in relation to this there is a brake signal. Here, the brake pressure is used as a measured variable. This prevents braking deceleration being stopped by a jamming accelerator pedal.