86 10 ... Disassembly Of Front Protection Bar

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) on cross-member (2).

Installation:

Use new self-locking nuts.

Tightening Torque. Refer to TRAILERS - TIGHTENING TORQUES - ALPINA .

Fig 1: Identifying Screws On Cross-Member

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on longitudinal member (2).

Installation:

Tightening Torque. Refer to TRAILERS - TIGHTENING TORQUES - ALPINA .

Fig 2: Identifying Screws On Longitudinal Member

Courtesy of BMW OF NORTH AMERICA, INC.