33 32... Replacing left or right trailing arm bracket
Necessary preliminary tasks:
- Remove TRAILING ARM WITH BRACKET
IMPORTANT:
When replacing trailing arm:
Replace self-tapping screw.
Before installing the trailing arm, tap a thread in the trailing arm with the new screw.
Replace self-tapping screw.
Before installing the trailing arm, tap a thread in the trailing arm with the new screw.
Release screw (1) and remove bracket (2).
Tightening torque 33 32 4AZ .
Installation:
Tighten down screw in NORMAL POSITION .
After installation:
- Perform wheel alignment check. See ALIGNMENT CHECK WITH VEHICLE LOAD or ALIGNMENT CHECK/RIDE HEIGHT MEASUREMENT WITHOUT VEHICLE LOAD .