31 35 005 Removing And Installing/Replacing Push Rod (Stabilizer Link) For Left/Right Stabilizer
WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Stabilizer links may only be replaced in pairs.
Necessary preliminary tasks: Remove front wheel
- Release nuts (1, 2); if necessary, grip at Torx socket.
Remove stabilizer link.
Installation:
Replace self-locking nuts.
Tighten to specified torque. See 31 35 11AZ in FRONT AXLE -- TORQUE SPECIFICATIONS .