31 35 005 Removing And Installing/Replacing Push Rod (Stabilizer Link) For Left/Right Stabilizer
WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Stabilizer links may only be replaced in pairs.
Necessary preliminary tasks:
- Remove front wheel
Release nuts (1, 2); if necessary, grip at Torx socket.
Remove stabilizer link.
Installation:
Replace self-locking nuts.
Tightening torque 31 35 11AZ . See 31 35 STABILIZER BAR for specs.