12 14 526 Replacing Pulse Generator On Right Inlet Camshaft (N73)

WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

(cylinder bank 1 to 6)
Read out fault memory in DME control unit.
Remove center equipment bulkhead . See 51 71 085 REMOVING AND INSTALLING CENTER OF ASSEMBLY COMPARTMENT BULKHEAD .

Unlock and detach plug connection (1).

Unscrew screw.

Remove pulse generator (2).

Installation:

Replace sealing ring and coat with anti-friction rubber coating.

Fig 1: Identifying Plug Connection & Pulse Generator

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Check function of DME.