61 71 100 Removing And Installing/Replacing Windshield Washer Pump

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Drain fluid reservoir for windshield washer system

Remove front underbody protection.

Detach front left wheel arch trim in front area and fold back.

Remove bottom left cover.

Disconnect plug connection (1).

Detach hose (2) from windshield washer pump (3).

Pull windshield washer pump (3) up and out of fluid reservoir for windshield washer system (4).

Fig 1: Identifying Plug Connection And Hose

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace strainer for windshield washer pump.

If necessary, coat sealing ring of windshield washer pumps with antiseize agent.

Ensure hose is laid without kinks.