52 26 .. Removing and Installing/Replacing Trim And Frame For Ski Bag

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317. See 00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE) .

Release screws (1).

Tightening torque 52 26 23AZ. See 52 26 REAR SEATS (THROUGH-LOADING SYSTEM) .

Lever out caps (1).

Release screws underneath.

Tightening torque 52 26 23AZ. See 52 26 REAR SEATS (THROUGH-LOADING SYSTEM) .

Release screw (1).

Tightening torque 52 26 21AZ. See 52 26 REAR SEATS (THROUGH-LOADING SYSTEM) .

Remove Top Tether eyelet.

Lever out frame (1) for ski bag with special tool 00 9 317. See 00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE) .

IMPORTANT: Risk of damage in marked area.
Plastic eyelet of front trim can break.
If necessary, replace faulty trim.

Remove front ski bag trim (1) in direction of arrow.