84 11 550 Removing And Installing/Replacing Hands - Free Microphone

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Lever out microphone trim (1) at front in direction of arrow.

Disconnect plug connection underneath and remove microphone trim (1).

Fig 1: Identifying Microphone Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock detent lug (1) and feed out hands-free microphone (2) in direction of arrow.

Installation:

Arrow on hands-free microphone (2) points in driving direction.

Fig 2: Unlocking Detent Lug

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Disconnecting the plug connection for the hands-free microphone or emergency SOS call button results in fault memory entries in the telephone control unit (limitation in the emergency SOS call system).
After fitting, read out fault memory and if necessary delete entries.