66 31 016 Removing And Installing/Replacing Long Range Sensor (LRR Sensor) (From Build Date 03/2007)

WARNING: This page is about a different car, the 2007 BMW M5, 2007 BMW 550i, 2006 BMW M5, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Lever out trim (1) with special tool 00 9 317 and remove.

Fig 1: Identifying Trim And Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Tape off bumper in working area (1) with yellow plastic adhesive tape.

Unclip long range sensor (2) from mounting.

Installation:

Make sure long range sensor (2) is correctly seated.

Fig 2: Identifying Long Range Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Secure long range sensor (1) against falling out.

Disconnect plug connection (2) and remove long range sensor (1).

Fig 3: Identifying Long Range Sensor And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out LRR SENSOR ADJUSTMENT using BMW diagnosis system.
Carry out PROGRAMMING/CODING .