84 11 612 Removing And Installing/Replacing Eject Box (In Rear Center Armrest)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW 760i, 2005 BMW 760i, 2005 BMW 760Li, 2004 BMW 760i, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For Special Tool identification, see MAINTENANCE AND GENERAL INFORMATION - SPECIAL .

Special Tools Required:

00 9 317

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection)! Refer to 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

NOTE: Electrical components which are particularly sensitive to electrostatic discharge (electronic control units, sensors, etc.) are marked with the ESD warning symbol.

E -Electro.

S -Static.

D -Discharge.

Remove storage tray/CD box.

Snap out trim (1) in upward direction and disconnect plug connections underneath.

Lift out mat insert (2).

Fig 1: Identifying Mat Insert In Center Armrest

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out trim (1) with special tool 00 9 317.

Fig 2: Removing Trim With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Lever eject box (1) with special tool 00 9 317 out of fixture and feed out associated wiring harness.

Fig 3: Removing Eject Box

Courtesy of BMW OF NORTH AMERICA, INC.