LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1051 (Tire Pressure Monitor Systems) >> TPMS Reset Procedures >> Tire Pressure Monitor System REINITIALIZATION >> The Flat Tire Monitor (FTM) >> M5 & M6 With Sequential Manual Transmission
April 5, 2026: LEMON Manuals is launched! Read the announcement.

M5 & M6 With Sequential Manual Transmission

WARNING: This page does not describe the selected car, but rather 37 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2010 BMW 650i, 2010 BMW 550i, and 2010 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start the engine, but do not start driving.
  2. Press the TPMS button (see Fig 1 or Fig 2) at least 4 seconds, but not longer than 2 minutes.
  3. After releasing the button, the warning lamp in the instrument cluster lights up yellow for a few seconds, and the message "Initializing FTM..." appears on the Control Display for a few seconds.
  4. Start to drive. The initialization finishes during driving without additional feedback.
Fig 1: Identifying Flat Tire Monitor (FTM) Initialization Button (M5)
G00507128Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Identifying Flat Tire Monitor (FTM) Initialization Button (M6)
G00507129Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals