LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1350 (General Electrical System - Repair) >> 31 Switch >> 61 31 203 Replacing Switch Combination For Seat Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 31 203 Replacing Switch Combination For Seat Adjustment

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Remove and install center armrest (front)  . See 51 16 195 REMOVING AND INSTALLING CENTRE ARMREST (FRONT) .

CAUTION: Set down center armrest on a suitable surface.

Release screws (1).

Lever out front center armrest trim (2) with special tool 00 9 341 and remove and direction of arrow.

Fig 1: Identifying Special Tool (00 9 341)
G04768591Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1).

Fig 2: Identifying Plug Connections
G04768592Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed out switch combination for seat adjustment (2) in direction of arrow.

Fig 3: Identifying Switch Combination And Screws
G04768593Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure guides (1) are correctly seated in mountings (2).

Fig 4: Identifying Guides And Mountings
G04768594Courtesy of BMW OF NORTH AMERICA, INC.