86 21... Removing lock striker fixture on rear lid: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Grip rubber seal on seal piping (1) and pull off in area of lock striker fixture (2). Grip lid seal (3) on seal piping (4) and pull off in area of lock striker fixture (2).

Fig 1: Grip Rubber Seal On Seal Piping

Courtesy of BMW OF NORTH AMERICA, INC.

CAUTION: Before drilling out rivets, drive in rivet pins with a punch.
Drill out rivets (1+2) and remove lock striker fixture (3).

Fig 2: Drill Out Rivets And Remove Lock Striker Fixture

Courtesy of BMW OF NORTH AMERICA, INC.