66 31 016 Removing and installing/replacing long-range sensor (LRR sensor): Notes

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove ORNAMENTAL GRILLE for bumper panel, middle.
Version with Sports package only:
Remove NUMBER/LICENSE PLATE BASE PLATE (number/license plate baseplate conceals sensor adjusting screw)

IMPORTANT: Secure LRR sensor (2) against falling out.
Cover bumper in working area (1) with adhesive tape.

Using special tool 00 9 317 unclip LRR sensor (2) from brackets on both sides.

Installation note:

LRR sensor must be felt and heard to snap into place.

Fig 1: Removing LRR Sensor From Brackets Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Secure LRR sensor (1) against falling out.

Disconnect plug connection (2) and remove sensor (1).

Fig 2: Identifying LRR Sensor And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.