LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3712 (General Electrical System - Repair) >> Switch >> 61 31 231 Removing and installing/renewing steering wheel module control unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 31 231 Removing and installing/renewing steering wheel module control unit

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks: 

NOTE: Steering wheel cover is shown removed for purposes of clarity.

Remove control unit for steering wheel module (1) from steering wheel (2) in direction of arrow.

Fig 1: Removing Steering Wheel Module Control Unit
G06895025Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove steering wheel electronics control unit (2).

Installation note: 

Make sure electronic steering wheel module (2) is fitted correctly.

Fig 2: Identifying Electronic Steering Wheel Module And Plug Connection
G08509782Courtesy of BMW OF NORTH AMERICA, INC.