13 62 610 Replacing crankshaft pulse sensor (N57 D30 O/T 1)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove INTAKE SILENCER HOUSING .

Pull connector (1) off pulse sensor.

Release screw (2).

Tightening torque 13 62 6AZ .

Remove pulse sensor.

Fig 1: Identifying Pulse Sensor Connector Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.

Read out the fault memory of the DDE control unit.

Clear DDE fault memory.