61 31 134 Removing and installing/replacing USB/audio interface connecting socket

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 530xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM FOR STORAGE TRAY

Insert suitable screwdriver (1) through opening (2) in direction of arrow.

NOTE: Protect connecting socket wiring harness against being damaged by screwdriver (1).

Press against connecting socket (3) in lower area.

Remove connecting socket (3) in direction of arrow.

Fig 1: Removing Connecting Socket

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Installation:

Retaining lug (3) must not be damaged.
Make sure connecting socket (2) is correctly seated in storage compartment (4).

Fig 2: Identifying Storage Compartment, Connecting Socket And Plug Connection
Courtesy of BMW OF NORTH AMERICA, INC.