Terminal control

The CAS activates the following terminals via the START-STOP unit as follows:

• Terminal R

  To maintain the starting capability of the vehicle, the CAS switches terminal R off automatically. if the driver's door is opened and closed and no seat occupancy is detected, terminal R will be switched off after 8 minutes.

• Terminal 15

  The CAS controls terminal 15 (= active positive) for all electrical systems.

• Wake-up line (terminal 15 wake up)

  Switching on terminal 15 activates (wakens) the control units on the PT-CAN via the wake-up line.

• Terminal 50L

  During the starting operation, terminal 50L is connected to the starter.

• Switched terminal 30g

  Some consumers (e.g. SHD, DSC) are attached to terminal 30. Terminal 30 is switched by the CAS. Shutting down the consumers on terminal 30g reduces the off-load current.