86 21... Installing seal for rear lid and side lid: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following text describes how to install the seal for the rear lid as an example. Proceed in the same way for the side lids.
Removing old seal:
Open lid. Grip seal piping with both hands and pull seal off hood ridge. Remove old seal over lid.
Removing old seal:
Open lid. Grip seal piping with both hands and pull seal off hood ridge. Remove old seal over lid.
Push seal piping (1) by hand onto hood ridge (2). Using a rubber hammer, gently tap seal piping (1) as far as it will go onto hood ridge (2). Make sure piping (1) is evenly positioned especially in radii of hood ridge.