Failure of the component
WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.
If the rail pressure sensor fails, the following behavior is to be expected:
- Fault entry in the engine control unit
- Emergency operation with substitute value
General notes
Diagnosis of the rail pressure sensor is started as soon as the ignition is switched on. After that, the diagnosis runs continuously every 100 ms.
We can assume no liability for printing errors or inaccuracies in this document and reserve the right to introduce technical modifications at any time.