LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2014 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 807 (General Electrical System - Repair) >> Switch >> 61 31 079 Replacing switch for hazard warning system/central locking
April 5, 2026: LEMON Manuals is launched! Read the announcement.

61 31 079 Replacing switch for hazard warning system/central locking

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 330Ci, 2005 BMW 330xi, 2005 BMW 330i, 2005 BMW 330Ci, and 2004 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Remove storage compartment trim. See 61 31 055 Removing and installing/replacing switch for SMG transmission (program selector switch) 

Version without sequential M transmission only:

Unclip gaiter (1) at side and force upwards over gear lever knob (2).

Fig 1: Unclipping Gaiter (Version With Sequential M Transmission Only)
G03125182Courtesy of BMW OF NORTH AMERICA, INC.

All:

Release screws (1).

Fold storage compartment floor (2) up at rear and place to one side.

Fig 2: Removing Storage Compartment Floor
G03125183Courtesy of BMW OF NORTH AMERICA, INC.

Raise storage compartment (1) at front slightly.

Press side catches and press switch for hazard warning system/central locking from below out of storage compartment (1).

Fig 3: Raising Storage Compartment
G03125184Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection and remove switch for hazard warning system/central locking.

Fig 4: Disconnecting Plug Connection & Removing Switch For Hazard Warning System/Central Locking
G03125185Courtesy of BMW OF NORTH AMERICA, INC.