System functions: Display

The exterior mirror cameras give support during parking and manoeuvring. This is achieved by illustrating the vicinity of the doors and roadway around the vehicle on the Central Information Display (CID). The range is approximately three metres. The exterior mirror cameras are switched off during forwards travel after approximately 50 metres or above approximately 36 km/h.

The bumper cameras enable an early view of crossing traffic at exits and junctions with a poor viewing angle. Road users that are concealed by obstacles at the side are only detected later from the driver's seat. To improve the view, 2 cameras in the bumper pick up the traffic at the sides. The camera images are displayed in a split screen.

The rear view cameras provide support when parking backwards and manoeuvring. To achieve this, the area behind your vehicle is shown on the central information display (CID). Various assistance graphics in the form of overlays (graphics and text) can be overlaid in the image of the camera. The assistance graphics can be enabled or disabled in the menu of the rear view camera.

The assistance graphics are:

• Maximum curve radii for the turning circle
• Marker lines for the lane
• Marking of obstacles
• Zoom to trailer tow hitch