LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2017 >> Cooper S, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> General Electrical System - Repair (F57) >> 61 35 Control Units, Modules >> Overview, rain sensor (additional work when replacing the windshield/sensor replacement) (Cooper Convertible)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Overview, rain sensor (additional work when replacing the windshield/sensor replacement) (Cooper Convertible)

Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor/Programming/coding necessary When replacing the sensor/Initialization required Connecting the diagnostic system required
Condensation sensor square
30 x 20 mm
Yes No No No
Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing substitute visuals Programming/coding necessary When replacing the sensor/substitute visuals Initialization required Connecting the diagnostic system required
all types square
60 x 40 mm
No Yes - Yes Yes
RLS approximately ø 50 mm No (new substitute visuals required, refer to Applicable BMW Parts Catalog) - No Yes Yes
Sensor type/Sensor shape With windshield replacement, replacement sensor  required When replacing the sensor  Programming/coding necessary When replacing substitute visuals  Programming/coding necessary When replacing the sensor/substitute visuals  Initialization required Connecting the diagnostic system required
RLPSS (Rain, light and precipitation solar sensor) (Designation is located on the back of the sensor)
Approximately ø 50 mm
Yes Yes - Yes Yes
RLS (vehicle with no HUD  ) (Designation is located on the back of the sensor)
Approximately ø 50 mm
No (new substitute visuals  required, refer to the applicable BMW Parts Catalog) - No Yes Yes
RLSS (vehicle with HUD  ) (Designation is located on the back of the sensor)
Approximately ø 50 mm
Yes Yes - Yes Yes
Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing the sensor Initialization required Connecting the diagnostic system required
all types square
60 x 40 mm
No Yes Yes Yes
Sensor type/Sensor shape With windshield replacement, replacement sensor  required When replacing the sensor  Programming/coding necessary When replacing substitute visuals  Programming/coding necessary When replacing the sensor/substitute visuals  Initialization required Connecting the diagnostic system required
all types approximately
ø 35 mm
No No - Yes Yes
all types approximately ø 50 mm Yes Yes - Yes Yes
Only for F25: 
RLS
Approximately ø 50 mm
No (new substitute visuals  required, refer to the applicable BMW Parts Catalog) - No Yes Yes
Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing the sensor Initialization required Connecting the diagnostic system required
all types approximately ø 35 mm No No No No
Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing the sensor Initialization required Connecting the diagnostic system required
all up to 03/2014  except operating fluid (01) (Designation is located on the back of the sensor)
Approximately ø 35 mm
No No Yes Yes
Operating fluid (01) (Designation is located on the back of the sensor)
Approximately ø 35 mm
No No No No
All as from 03/2014  approximately ø 35 mm No No No No
Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing the sensor Initialization required Connecting the diagnostic system required
all types No No No No

BMW i: 

Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing the sensor Initialization required Connecting the diagnostic system required
all types approximately ø 35 mm No No No No

BMW  from G series 

Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing the sensor Initialization required Connecting the diagnostic system required
all types No No No No

MINI (all): 

Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing the sensor Initialization required Connecting the diagnostic system required
all types square
60 x 40 mm
No Yes Yes Yes
all types approximately ø 35 mm No No No No

Rolls-Royce: 

Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing the sensor Initialization required Connecting the diagnostic system required
all types square
60 x 40 mm
No Yes Yes Yes
all types approximately ø 35 mm No No Yes Yes
all types approximately ø 50 mm Yes Yes Yes Yes

Rolls-Royce: 

Sensor type/Sensor shape With windshield replacement, replacement sensor required When replacing the sensor Programming/coding necessary When replacing the sensor Initialization required Connecting the diagnostic system required
all types approximately ø 35 mm No No No No