Removing and installing/replacing battery of telematics platform, low (Cooper Convertible )

WARNING: This page is about a different variant/trim than selected.

Preliminary work needed:

Removal:

Open and remove lid (1) on telematics platform, low (2).

Disconnect plug.

Take battery (1) out of telematics platform, low (2).

Installation:

Connect connector.

Insert battery (1) in telematics platform, low (2) and connect connector.

NOTE: Make sure battery and connector are correctly fitted.

Position and close lid (1) on telematics platform, low (2).

NOTE: Make sure lid (1) is correctly fitted.

Required follow-up work: