LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1990 >> Montero LS >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Starter >> Bench Testing >> Pull-In Coil Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Pull-In Coil Test

  1. Disconnect field coil wire from terminal "M" at starter solenoid. See Fig 1. Connect jumper wire between positive battery terminal of 12-volt battery and terminal "S" of solenoid.
  2. Connect a second jumper wire from negative battery terminal and touch terminal "M" of starter solenoid. See Fig 1. If solenoid plunger moves inward, solenoid is good. If not, replace solenoid.
Fig 1: Identifying Starter Solenoid Terminals
G90A08770Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals