LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1990 >> Montero SP, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Multi-Use Tester
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Using Multi-Use Tester

  1. Turn ignition off.
  2. Connect power source terminal of multi-use tester to cigarette lighter socket.
  3. Connect multi-use tester to diagnosis connector. See Fig 1 .
    Fig 1: Connecting Multi-Use Tester To Diagnosis Connector
    G00313737Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Turn ignition on.
  5. Using multi-use tester, read out and record self-diagnosis output.
  6. Refer to diagnosis chart, and repair the indicated location of malfunction. See DIAGNOSTIC TROUBLE CODE DEFINITIONS  .
  7. Erase malfunction code. See CLEARING DIAGNOSTIC TROUBLE CODES  .
scientia non olet · About LEMON Manuals