LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Galant GTZ >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Component Tests >> Throttle Position Sensor Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Throttle Position Sensor Test

  1. Disconnect throttle position sensor harness connector. Check resistance between sensor terminals No. 1 and 4. See WIRING DIAGRAMS . Resistance should be 3500-6500 ohms.
  2. Connect an analog ohmmeter between sensor terminals No. 1 and 3. Operate throttle valve slowly from idle to wide open throttle. Resistance should change smoothly as throttle is opened and closed. Replace and adjust throttle position sensor as necessary. See ON-VEHICLE ADJUSTMENTS article in ENGINE PERFORMANCE.
scientia non olet · About LEMON Manuals