LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Automatic Transaxle On-Vehicle Service) >> On-Vehicle Service >> Automatic Transaxle Control Component Check >> A/T Control Relay Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/T Control Relay Check

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/T control relay.
  2. Use jumper wires to connect the A/T control relay terminal 2 to the positive battery terminal and terminal 3 to the negative battery terminal.
    Fig 1: Checking A/T Control Relay
    G03278966Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Check the continuity between terminal 1 and terminal 4 of the A/T control relay when the jumper wires are connected to and disconnected from the battery.
    Fig 2: A/T Control Relay Resistance Chart
    G03278965Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. If there is any problem with the A/T control relay, replace it.
scientia non olet · About LEMON Manuals