October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Commutator Check
- Place the armature on a pair of V-blocks, and check the deflection by using a dial gauge.
- Standard value: 0.05 mm (0.002 inch)
- Limit: 0.1 mm (0.004 inch)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
- Check the outer diameter of the commutator.
- Standard value: 29.4 mm (1.16 inches)
- Minimum limit: 28.8 mm (1.13 inches)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
- Check the depth of the undercut between segments.
- Standard value: 0.5 mm (0.02 inch)
- Minimum limit: 0.2 mm (0.008 inch)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.