LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Lancer ES, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System -- Except Evolution >> Starter Motor Assembly >> Inspection >> Brushes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Starter Motor Assembly: Inspection: Brushes

  1. Check the commutator contacting surface of each brush for abnormal roughness. Also check the height of the brush. Replace the brush holder if the height is lower than the limit.

    Limit: 7.0 mm (0.27 in) 

  2. When the contact surface of the brush is rectified or the brush holder is replaced, recondition the contact surface with sandpaper wrapped around the commutator.
    Fig 1: Identifying Brush Height
    G02463991Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals