LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Lancer Evolution >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2011-12 OUTLANTER 3.0L >> Pattern 16 >> Test Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Accelerate until the vehicle speed is more than 50 km/h (31 mph).
  3. Stop at safe place and let the engine idle for 20 seconds. (During the monitor)
  4. Repeat Steps 2 and 3 for 10 times.
  5. Stop the vehicle at the safe place and turn the ignition switch to "LOCK" (OFF) position.
  6. Start the engine and do Steps 1 to 5 again.
  7. Confirm that the diagnostic trouble code (DTC) is not output.
scientia non olet · About LEMON Manuals