Accuracy Check Of Occupant Classification Sensor: Notes
CAUTION:
The following precaution must be observed when executing accuracy testing and calibration.
- Eliminate the occupant classification sensor friction.
- Perform the occupant classification sensor calibration at room temperature. (Proposal: 20 +/- 15° C (68 +/-27° F)) (Before the calibration, place the occupant classification sensor more than 30 minutes at room temperature.)
- Do not apply any load or vibration while the weight check and the calibration is performed.
- Perform the weight check and the calibration after seat components are all assembled.
NOTE:
When the seat adjuster assembly is replaced, the calibration at the seat supplier is not executed. Therefore, DTC B1541 remains set after installing the seat adjuster assembly in the vehicle until the calibration is executed. If the seat adjuster assembly is replaced, always execute the calibration first and carry out the accuracy check.