LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine And Emission Control >> Switch - Speed Control >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Switch - Speed Control: Installation

  1. Position switch to steering wheel.
  2. Install switch mounting screw and tighten to 1.7 N.m (15 in. lbs.).
  3. Plug electrical connector into switch.
  4. Install airbag module. Refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) .
  5. Connect negative battery cable to battery.
scientia non olet · About LEMON Manuals