Configuration Function
With the scan tool MB991958 operation, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
CONFIGURATION FUNCTION CHART
| Adjustment item (scan tool MB991958 display) | Adjustment item | Adjusting contents (scan tool MB991958 display) | Adjusting contents |
|---|---|---|---|
| Front wiper operation | Adjustment of the intermittent windshield wiper operation | Normal INT | Intermittent wiper interval is fixed to 4 seconds. |
| Variable INT | Intermittent wiper interval is calculated only by the wiper volume control. | ||
| Vehicle speed dependent | Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed (default). | ||
| Front wiper washer | Disabling or enabling washerlinked wiper function | Washer only | Without function |
| Washer-linked wiper | With function (default) | ||
| Rear wiper intermittent duration | Adjustment of rear wiper interval | 0 seconds | No wiper interval |
| 4 seconds | 4 seconds | ||
| 8 seconds | 8 seconds (default) | ||
| 16 seconds | 16 seconds | ||
| Rear wiper low speed mode | Disabling or enabling rear wiper continuous operation | Disabled | Without function (default) |
| Enabled | With function |