LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Raider SE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Control Modules >> Module - Front Control >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module - Front Control: Removal

Fig 1: Identifying Front Control Module (FCM), Four Fasteners And Power Distribution Center (PDC)
G04853424Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the Integrated Power Module (IPM) from the engine compartment.
  3. Remove the four fasteners (2) securing the Front Control Module (FCM) (1) to the Power Distribution Center (PDC) (3).
  4. Separate the FCM from the PDC by pulling the two straight away from each other to disengage the electrical connector.
scientia non olet · About LEMON Manuals