LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2008 >> Outlander LS, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Body >> Door >> On-Vehicle Service >> Power Window Operating Current Check
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Window Operating Current Check

  1. Remove the power window fuse, and connect a multimeter as shown in the illustration.
  2. Raise the power window to measure the current during operation.

    Standard value: 7 A or less [Power supply voltage 14.5 ± 0.5 V, at 25°C (77°F)] 

    NOTE: If the power supply voltage does not meet the standard value, check and repair the generator and the battery. Then carry out this check again.
    Fig 1: Identifying Power Window Fuse
    G05432979Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. If the operation current is outside the standard value, refer to TROUBLE SYMPTOM CHART < POWER WINDOW> .
scientia non olet · About LEMON Manuals