Lin (Lighting Control Sensor)
SCAN TOOL DISPLAY CHART
| Item No. | Scan tool display | Check condition | Normal condition |
|---|---|---|---|
| 7005 | RLS Rain sensor ON/OFF | When the wiper switch is AUTO position | ON |
| When a switch (except the wiper switch) is AUTO position | OFF | ||
| 7006 | RLS Rain sensor sensitivity | Changes from 1 to 5 according to the wiper volume. | 1, 2, 3, 4, 5 |
| 7008 | RLS Wiper auto stop SW | When the windshield wiper is in operation | Park |
| Other than above | Outside park | ||
| 7013 | RLS Wiper control output | When the operation is not requested from lighting control sensor (rain sensor). | OFF |
| When the LO operation is requested from lighting control sensor (rain sensor) | LO | ||
| When the HI operation is requested from lighting control sensor (rain sensor) | HI | ||
| 7020 | RLS RS measurement value (RS1) | When the lighting control sensor (rain sensor) detects raindrops | The sensor 1 detects raindrops and the value changes. |
| 7021 | RLS RS measurement value (RS2) | When the lighting control sensor (rain sensor) detects raindrops | The sensor 2 detects raindrops and the value changes. |
| 7022 | RLS RS adaptation value (RS1) | When initializing after the adaptation (sensor 1) | The amount of output when initializing (sensor 1) |
| 7023 | RLS RS adaptation value (RS2) | When initializing after the adaptation (sensor 2) | The amount of output when initializing (sensor 2) |
| 7024 | RLS RS adaptation gain level | When initializing after the adaptation | The calibrated value of initializing |