Fuel Level Sensor Float Height
WARNING: This page is about a different variant/trim than selected.
- Remove the fuel pump module (Refer to FUEL TANK < 2.0 L engine, 2.4 L engine > or FUEL TANK < 2.0L ENGINE TURBO > < RALLIART >).
- When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.
FUEL LEVEL SENSOR FLOAT HEIGHT STANDARD VALUE (FWD)
| Float position | Float height {mm (in)} |
|---|---|
| Stopper position "F" (height A) | 181.5 (7.1) |
| Stopper position "E" (height B) | 26.7 (1.0) |
FUEL LEVEL SENSOR FLOAT HEIGHT STANDARD VALUE (AWD)
| Float position | Float height {mm (in)} | |
|---|---|---|
| Main | Sub | |
| Stopper position "F" (height A) | 140.9 (5.5) | 14.2 ± 3.0 (0.6 ± 0.1) |
| Stopper position "E" (height B) | 39.1 (1.5) | 179.3 ± 3.0 (7.1 ± 0.1) |