Drive Mode Selector Check
WARNING: This page is about a different car, the 2012 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
DRIVE MODE SELECTOR TERMINALS CONTINUITY REFERENCE CHART
| Switch position |
Terminal number |
Normal conditions |
| 2WD (FWD) |
1 - 2 |
Continuity exists (2 ohm or less). |
| 2 - 3 |
No continuity |
| 4WD (AWD) |
1 - 2 |
No continuity |
| 2 - 3 |
| LOCK |
1 - 2 |
No continuity |
| 2 - 3 |
Continuity exists (2 ohm or less). |
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.