LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2015 >> RVR SE, AWD >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Precautions Before Service >> Engine Idling Learning Procedure >> Learning Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Learning Procedure

  1. Start the engine and warm to reach 80°C (176°F) or more.
    NOTE: When the engine coolant temperature is 80°C (176°F) or more, the warm-up is not needed if the ignition switch is in "ON" position once.
  2. Turn the ignition switch to "LOCK" (OFF) position.
  3. After 10 seconds or more, start the engine again.
  4. For 10 minutes, carry out the idling under the condition shown below and then confirm the engine idles normally.
    • Transaxle: Neutral (P range on vehicles with CVT)
    • Operation in ignition-related, fan and attachments: Not to be operated
    • Engine coolant temperature: 80°C (176°F) or more
      NOTE: If the engine stalls while idling, check for a dirty (on the throttle valve) of the throttle body and clean if needed. Then perform the service from Procedure 1 again.
scientia non olet · About LEMON Manuals