October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Inspection of the (+) diode
- Check the electrical continuity of the points shown in the table below. Confirm that there is not electrical continuity. If there is, replace the generator assembly.
| Measured terminal No. Tester: (+) side - (-) side |
Continuity |
| B terminal - 1 |
Continuity exists. |
| B terminal - 2 |
| B terminal - 3 |
| B terminal - 4 |
| B terminal - 5 |
| B terminal - 6 |
| 1 - B terminal |
No continuity |
| 2 - B terminal |
| 3 - B terminal |
| 4 - B terminal |
| 5 - B terminal |
| 6 - B terminal |
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|