September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Diagnostic Procedure
- Remove ECT sensor, and place in heated water. Measure resistance between sensor terminals, with water at specified temperatures. See ECT SENSOR RESISTANCE for specifications. If resistance is as specified, go to next step. If resistance is not as specified, replace ECT sensor.
- Allow engine to cool to less than 158°F (70°C). Start engine. Grasp lower radiator hose to check for coolant flow. If coolant is flowing, replace thermostat. If coolant is not flowing, go to next step.
- No problem is indicated at this time. Problem may be intermittent. See INTERMITTENTS
in TROUBLE SHOOTING - NO CODES article.