BLUETOOTH Control Unit (Steering Wheel Audio Control Switch) Check
WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to ACC or ON.
- Wait for the Bluetooth system to complete initialization. This may take up to 10 seconds.
- Press and hold the steering wheel audio control switch button for at least 5 seconds. The Bluetooth system will begin to play a verbal prompt.
- While the prompt is playing, press and hold the steering wheel audio control switch button until you hear the "Diagnostics mode" prompt. The Bluetooth system will sound a 5 second beep.
- While the beep is sounding, press and hold the steering wheel audio control switch button again until you hear prompts.
- The Bluetooth system has now entered into the diagnostic mode. Results of the diagnostic checks will be verbalized to the technician. Refer to "WORK FLOW ".
- After the failure records are reported, an interactive microphone test will be performed. Follow the voice prompt. If the microphone test fails refer to "WORK FLOW ".
- Self-diagnosis mode is complete when the voice prompt says "All diagnostic functions completed".