LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1142 (Navigation System) >> Navigation System >> AV Communication Line Check (Between Display Control Unit and A/C and AV Switch)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

AV Communication Line Check (Between Display Control Unit and A/C and AV Switch)

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK A/C AND AV SWITCH CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect display control unit connector and A/C and AV switch connector.
    3. Check continuity between display control unit and A/C and AV switch.
      CONTINUITY CHECK CHART

      Terminals Continuity
      Display control unit A/C and AV switch
      Connector Terminal (Wire color) Connector Terminal (Wire color)
      M43 28 (L/G) M48 6 (L/G) Yes
      30 (L/R) 8 (L/R)
    4. Check continuity between display control unit and ground.
      CONTINUITY CHECK CHART

      Terminals Continuity
      Display control unit Ground
      Connector Terminal (Wire color)
      M43 28 (L/G) No
      30 (L/R)
      Fig 1: Checking Continuity Between Display Control Unit And Ground
      G03492584Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG

    1. OK: GO TO 2.
    2. NG: Repair harness or connector.
  2. CHECK SELF-DIAGNOSIS OF DCU 
    1. Replace A/C and AV switch.
    2. Connect display control unit connector and A/C and AV switch connector.
    3. Turn ignition switch ON.
    4. Start self-diagnosis of DCU, and check the self-diagnosis result.

    OK or NG

    1. OK: INSPECTION END.
    2. NG: Replace display control unit.
scientia non olet · About LEMON Manuals