Wheel Alignment (Unladen )
WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Some vehicles may be equipped with straight (non-adjustable) lower link bolts and washers. In order to adjust camber and caster on these vehicles, first replace the lower link bolts and washers with adjustable (cam) bolts and washers.
WHEEL ALIGNMENT REFERENCE
| Drive type | 2WD | 4WD | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Camber Degree minute (decimal degree) |
Minimum | -0° 57' (-0.95°) | -0° 27' (-0.45°) | |||||||||||
| Nominal | -0° 12' (-0.20°) | 0° 18' (0.30°) | ||||||||||||
| Maximum | 0° 33' (0.55°) | 1° 03' (1.05°) | ||||||||||||
| Cross camber | 0° 45' (0.75°) or less | 0° 45' (0.75°) or less | ||||||||||||
| Caster Degree minute (decimal degree) |
Minimum | 2° 15' (2.25°) | 1° 27' (1.45°) | |||||||||||
| Nominal | 3° 0' (3.00°) | 2° 12' (2.20°) | ||||||||||||
| Maximum | 3° 45' (3.75°) | 2° 57' (2.95°) | ||||||||||||
| Cross caster | 0° 45' (0.75°) or less | 0° 45' (0.75°) or less | ||||||||||||
| Kingpin inclination (reference only) Degree minute (decimal degree) | 13° 33' (13.55°) | 13° 0' (13.00°) | ||||||||||||
| Total toe-in | Distance (A - B) | Minimum | 1.8 mm (0.07 in) | 1.8 mm (0.07 in) | ||||||||||
| Nominal | 2.8 mm (0.11 in) | 2.8 mm (0.11 in) | ||||||||||||
| Maximum | 3.8 mm (0.15 in) | 3.8 mm (0.15 in) | ||||||||||||
| Angle (left plus right) Degree minute (decimal degree) | Minimum | 0° 3' (0.05°) | 0° 3' (0.05°) | |||||||||||
| Nominal | 0° 5' (0.08°) | 0° 5' (0.08°) | ||||||||||||
| Maximum | 0° 7' (0.12°) | 0° 7' (0.12°) | ||||||||||||
| Wheel turning angle (full turn) | Inside Degree minute (decimal degree) |
34° 30' - 38° 30' (2) (34.50° - 38.50°) |
34° 56' - 38° 56' (4) (34.93° - 38.93°) | |||||||||||
| Outside Degree minute (decimal degree) |
30° 58' - 34° 58' (3) (30.97° - 34.97°) |
31° 01' - 35° 01' (5) (31.02° - 35.02°) |
||||||||||||
|
||||||||||||||