LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Engine Controls - Self-Diagnostics) >> Scan Tool Usage >> Consult-II >> Real Time Diagnosis In Data Monitor Mode Operation (Recording Vehicle Data)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Real Time Diagnosis In Data Monitor Mode Operation (Recording Vehicle Data)

WARNING: This page is about a different car, the 2003 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

  1. Automatic Trigger (AUTO TRIG)

    While trying to detect the DTC/1st trip DTC by performing the "DTC Confirmation Procedure", be sure to select "DATA MONITOR (AUTO TRIG)" mode. You can confirm the malfunction at the moment it is detected.
  2. While narrowing down the possible causes, CONSULT-II should be set in "DATA MONITOR (AUTO TRIG)" mode, especially in case the incident is intermittent. When you are inspecting the circuit by gently shaking (or twisting) the suspicious connectors, components and harness in the "DTC Confirmation Procedure", the moment a malfunction is found the DTC/ 1st trip DTC will be displayed.

  3. Manual Trigger (MANU TRIG)

    If the malfunction is displayed as soon as "DATA MONITOR" is selected, reset CONSULT-II to "MANU TRIG". By selecting "MANU TRIG" you can monitor and store the data. The data can be utilized for further diagnosis, such as a comparison with the value for the normal operating condition.
scientia non olet · About LEMON Manuals